EQ-3000 手持式气吹螺丝机

产品说明：

1.全自动供科

全自动送料系统,将螺丝吹送至批头,直接锁附产品,操作简单,效率高。

2.横拉式分料

螺丝分料通过气缸横拉分料，分料稳定,不卡料，分料速度快。

3.运转流畅

螺丝在滚商内运转,未按正常方向进入轨道的螺丝,都会掉到滚简内,进入下个循环,无卡料现象。

4.3.5寸大触摸屏

3.5寸电阻式大触摸屏，实时监控各个运动部件运动状态,大屏显示更清楚，参数调节更方便。

5.供料效率可调节

上料转盘速座及振动大小等参数直接在显示屏上调节，操作简单

6.振动稳定

送料通过电磁振动,振幅小,频率可调,使得振动稳定，电磁振动寿命长

7.缺料报警功能

当料仓发生缺料超时,供料器会自动报警提示。

8.扩展性强

自主研发控制线路板，功能强大,稳定性好,可根据客户需求定制,可扩展能力强。

螺钉适用范围：

*非标螺钉均为定制，需以实物评估吹送可行性

Product Description:
1. Fully automatic supply
Fully automatic feeding system, blowing the screw to the bit, directly locking the product, simple operation, high efficiency.
2. Horizontal pull dispensing
The screw material is pulled horizontally through the cylinder, and the material is stable, not stuck, and the material speed is fast.
3. Smooth operation
The screws run in the roller business, and the screws that do not enter the track in the normal direction will fall into the rolling simplification and enter the next cycle, without the phenomenon of jamming.
4.3.5 inch large touch screen
The 3.5-inch resistive large touch screen can monitor the movement status of each moving part in real time, and the large screen display is clearer and the parameter adjustment is more convenient.
5. The feeding efficiency is adjustable
Parameters such as the speed seat of the feeding turntable and the size of the vibration can be adjusted directly on the display screen, which is simple to operate
6. Stable vibration
The feeding is made by electromagnetic vibration, the amplitude is small, and the frequency is adjustable, so that the vibration is stable and the electromagnetic vibration life is long
7. Lack of material alarm function
When the silo is short of material and overtime, the feeder will automatically alarm and prompt.
8. Strong scalability
Independent research and development of control circuit board, powerful, good stability, can be customized according to customer needs, strong scalability.

Scope of application of screws:
Applicable screw type Screw range Total length of screw L(mm) Nut diameter D(mm) L/D ratio (L/D)
Screw material

Applicable working conditions
Standard Screws M1.4-M6 ≤16 4≤D≤8 ≥1.5 Ferrous/non-magnetic Flat/deep hole or interference height less than 40mm
Combination Screws M1.4-M6 ≤16 4≤D≤8 ≥1.5 Ferrous / Non-magnetic Flat bore / deep bore or interference height less than 40mm
Non-standard screws ≤M6 ≤20 2.5≤D≤12 ≥1.4 Ferrous/non-magnetic Flat hole/deep hole or interference height less than 30mm
*Non-standard screws are customized, and the feasibility of blowing needs to be evaluated in kind